Tables on Legs with Bottom Shelf and Splashback

Tables on Legs with Bottom Shelf and Splashback
Free

Worktopos up to cm. 200 length and two different depth sizes, cm 60 and 70.
They are made from AISI 304 Cr. Ni. 18/10 stainless steel mm. 1 thickness. They are reinforced by bi-laminated chipboard panel 20 mm thickness. Welded unit performed on legs in 40x40x1 square pipe – 304 Cr. Ni.18/10 Aisi steel equipped with adjustable feet. Reinforced lower shelves are made from AISI 304 CR.Ni. 18/10. stainless steel sheet

ASK FOR INFORMATION

Need Help? Contact Us Leave Feedback

Category:

Depth 600mm

 

Code Sizes (mm) Splashback kg m³
DTGRA6-80 800x600x850H H 100 39 0,54
DTGRA6-90 900x600x850H H 100 41 0,61
DTGRA6-10 1.000x600x850H H 100 43 0,68
DTGRA6-11 1.100x600x850H H 100 45 0,74
DTGRA6-12 1.200x600x850H H 100 47 0,81
DTGRA6-13 1.300x600x850H H 100 49 0,88
DTGRA6-14 1.400x600x850H H 100 51 0,94
DTGRA6-15 1.500x600x850H H 100 53 0,101
DTGRA6-16 1.600x600x850H H 100 55 0,107
DTGRA6-17 1.700x600x850H H 100 57 0,114
DTGRA6-18 1.800x600x850H H 100 59 0,121
DTGRA6-19 1.900x600x850H H 100 61 0,127
DTGRA6-20 2.000x600x850H H 100 63 0,134
DTGRA6-21 2.100x600x850H H 100 65 0,141

 

Depth 700mm

 

Code Sizes (mm) Splashback kg m³
DTGRA7-80 800x700x850H H 100 47 0,63
DTGRA7-90 900x700x850H H 100 49 0,71
DTGRA7-10 1.000x700x850H H 100 51 0,79
DTGRA7-11 1.100x700x850H H 100 53 0,86
DTGRA7-12 1.200x700x850H H 100 55 0,94
DTGRA7-13 1.300x700x850H H 100 57 0,102
DTGRA7-14 1.400x700x850H H 100 59 0,109
DTGRA7-15 1.500x700x850H H 100 61 0,117
DTGRA7-16 1.600x700x850H H 100 63 0,125
DTGRA7-17 1.700x700x850H H 100 65 0,133
DTGRA7-18 1.800x700x850H H 100 67 0,140
DTGRA7-19 1.900x700x850H H 100 69 0,148
DTGRA7-20 2.000x700x850H H 100 71 0,156
DTGRA7-21 2.100x700x850H H 100 73 0,163

Related Products